perimeter seals

Perimeter seals are designed to be mounted on the door stop or directly onto a plain frame of the door, therefore providing a door stop seal.

The seals shown hear are the most commonly used to address acoustic issues, we have a very extensive range of seals for different special applications - please contact us for more information.

RP10SI perimeter seal

Classified as a heavy duty seal, effective acoustic & smoke door stop frame seal. Quick & easy to install on plain or rebated door frames. Multi-fin design for improved noise & energy sealing. The minimum deflection design creates maximum sealing efficiency. RP10SI can be mitred or butt jointed for a neat finish. Adjustable by large fixing slots for a precision fit. RP10SI has a tamper resistant rigid PVC cover strip. Can be used on all four sides for a bulkhead seal. Max/min gap 0-10mm

If fixing to rebated frames on a single leaf check the backset of the door lock / latch for suitability.

sets for single doors

  • RP10SICS comprises 2 x 2100mm lengths + 1 x 1000mm length
  • RP10SICLS comprises 2 x 2750mm lengths + 1 x 1000mm length

sets for double doors

  • RP10SICS comprises 3 x 2100mm lengths
  • RP10SICLS comprises 2 x 2750mm lengths + 2 x 2000mm length

Use in conjunction with selected auto bottom seal. For pairs of doors (double doors) a meeting seal will be required.

Standard finish C has a clear anodised aluminium holder. Also available with a bronze anodised or black anodised holder at additional cost. The holder can also be special paint finished & a set up fee applies.

Test results include

  • Tested on a 35mm timber solid core door in conjunction with RP8SI bottom seal result STC30, Rw30
  • Tested on a 44mm timber solid core door fully caulked in conjunction with RP99SI bottom seal result STC32, Rw32
  • NCO HOKLAS testing by Techwide Engineering Ltd a NATA accredited laboratory

rp24si.png

RP24SI perimeter seal

Classified as a heavy duty seal, RP24SI is an effective door stop seal for noise, light & smoke. It can be butt jointed for a neatly finished continuous seal, replacing the conventional doorstop on metal or timber framed doors. With tamper proof concealed fixings, RP24SI utilises independently adjustable screws to achieve up to 8mm sealing adjustment for great noise control. The silicon rubber seal only requires normal door closing force. Max/min gap 0-8mm

If fixing to rebated frames of single doors - an extended backset lock / latch is most likely required

sets for single doors

  • RP24SICS comprises 2 x 2100mm lengths + 1 x 1000mm length
  • RP24SICLS comprises 2 x 2750mm lengths + 1 x 1000mm length

sets for double doors

  • RP24SICDS comprises 3 x 2100mm lengths
  • RP24SICDLS comprises 2 x 2750mm lengths + 2 x 2000mm length

Use in conjunction with selected auto bottom seal. For pairs of doors (double doors) a meeting seal will be required.

Standard finish C has a clear anodised aluminium holder. Also available with a bronze anodised or black anodised holder at additional cost. The holder can also be special paint finished & a set up fee applies.

Test results include

  • Tested on a 35mm timber solid core door in conjunction with RP38 bottom seal produces STC30, Rw30
  • Tested on a 44mm timber solid core door in conjunction with RP38 bottom seal produces STC33, Rw32
  • NCO HOKLAS testing by Techwide Engineering Ltd a NATA accredited laboratory

RP78SI.png

RP78SI perimeter seal

RP78 is an acoustic medium temperature smoke door frame seal designed for installation on door stops. Its aluminium carrier is sturdy and slotted for adjustment with concealed fixings. It is quick and easy to install around the jamb and head and can be fitted without removing the door. RP78Si can be mitred or butt jointed for a neat finish. Max/min gap 0-6mm

sets for single doors

  • RP78SICS comprises 2 x 2100mm lengths + 1 x 1000mm length
  • RP78SICLS comprises 2 x 2750mm lengths + 1 x 1000mm length

sets for double doors

  • RP78SICDS comprises 3 x 2100mm lengths
  • RP78SICLDS comprises 2 x 2750mm lengths + 2 x 2000mm length

Use in conjunction with selected auto bottom seal. For pairs of doors (double doors) a meeting seal will be required.

Standard finish C has a clear anodised aluminium holder. Also available with a bronze anodised holder at additional cost. The holder can also be special paint finished & a set up fee applies.

Test results include

  • Tested on a 35mm timber solid core door in conjunction with RP38 bottom seal produces STC 31, Rw 31
  • Tested on a 50mm timber solid core door fully caulked in conjunction with RP530 perimeter seal & RP70 bottom seal result STC33, Rw34
  • Tested on a 53mm proprietary acoustic timber door (high density core) in conjunction with RP120 perimeter seal & RP70 bottom seal result STC38, Rw39
  • Tested on a 54mm proprietary metal door (composite core #2) in conjunction with RP5300 perimeter seal & RP70 bottom seal result STC45, Rw45
  • NCO HOKLAS testing by Techwide Engineering Ltd a NATA accredited laboratory

rp120.png

RP120 perimeter seal

RP120 is a co-extruded PVC acoustic and smoke seals. Discreetly located in the protected corners of rebated timber or steel door and window frames. RP120 is suitable for new and retrofit applications.

sets for single doors

  • RP120S comprises 2 x 2100mm lengths + 1 x 1000mm length
  • RP120LS comprises 2 x 2750mm lengths + 1 x 1000mm length

sets for double doors

  • RP120DS comprises 3 x 2100mm lengths
  • RP120DLS comprises 2 x 2750mm lengths + 2 x 2000mm length

Use in conjunction with selected auto bottom seal. For pairs of doors (double doors) a meeting seal will be required.

Available in black or white (white is special order)

Test results include

  • Tested on a 35mm timber solid core door in conjunction with RP8SI bottom seal result STC30, Rw30
  • Tested on a 50mm timber solid core door fully caulked in conjunction with RP70 bottom seal produces STC 33, Rw 34
  • NCO HOKLAS testing by Techwide Engineering Ltd a NATA accredited laboratory